thin cut-2

[ Thin cut master ] For steel bar cutting / For steel tube cutting / Articles of cosumption

Thin cut master (for steel tube cutting)

Home > Thin curt master > Thin cut master (for steel tube cutting)

Tube cutting machine "Thin cut master" High productivity and long life of the saw blade have been achieved by rotating the circular saw blade at high speed so as to cut two tubes from underneath concurrently.

NCS-T2/50	NCS-T1/70
Tube cutting machine [movie] * Microsoft Media Player is required to view the video.

_Features

Substantial increase in cutting performance
A uniquely designed thinner kerf saw blade for steel pipe cutting is adopted. Due to dual-tube simultaneous cutting and faster blade rotation with thinner kerf, the productivity is dramatically improved.

"Bottom-up" : An ideal cutting method
Workpieces are cut from below by swinging the saw blade up and down. Adoption of this cutting method considerably reduces chip clogging in the tube workpiece, and prolonging the total life of the saw blade.

Optimization of cutting condition
The cutting setting is easily and speedily possible in everyone according to the touch panel. Because the rotational speed and the feeding speed of the saw blade can be arbitrarily set, the cutting condition can be optimized.

<Left>conventional machine
<Right>Noritake original machine

_{Machine specification}

Model	Cutting range	Dimensions HxWxL(mm)	Weight
NCS-T2/50	<1-pipe> 10-50mm <2-pipe> 10-30mm	1600x6650x1790(mm)	2500kgs
NCS-T1/70	<1-pipe> 20-70mm <2-pipe> 20-35mm	1300x6900x1400(mm)	3000kgs

* Standard equipment : Cutting machine + Loding device
* The minimum thickness of a pipe changes with outer diameters of a pipe.
* This lists the standard specification. The shape, demensions, and materials of the machines may be changed depending on the requested specification by custmers.