PRODUCTS

Thick Film Circuit Substrate with Copper Conductors

Ceramics & Materials

 

 

Technical Support

Our Thick Film  Circuit Substrate with Copper Conductors are used for high durability and fine-line conductor traces.

These substrates exhibit particularly excellent reliability in high-temperature environments.

 
  • 銅系厚膜回路基板1
  • 銅系厚膜回路基板2
Item Specification Condition
Conductor Resistivity Cu 2mΩ/□ 20 μm thick equivalent
Adhesion Initial ≧2.5Kg Φ0.6 mm tin-plated copper trace wire
Pad size: 2 mm□
Aged
(150°C, 48 hrs)
≧2.0Kg
Solder leach resistance Solder leach ≤ 40 μm Line width: 500 μm
Solder: 62Sn/36Pb/2Ag
235°C, 5 sec, 3 cycles
Item Preferable Available Condition
Resistor Resistance value 10 to 2MΩ    
TCR ±300ppm / °C   -55 to 25°C, 25 to 125°C
±150ppm / °C  
Rated power 40 to 600mW / mm2  
Resistance tolerance ≧±1.0%    
Stability Thermal shock ≦±1.5%   235°C, 10 sec, 1 cycle
H.H.B.T. ≦±2.0%   85°C, 85% RH, 1,000 hours
Thermal cycle ≦±1.5%   -40°C – 150°C, 500 cycles
High-temperature storage ≦±2.0%   150°C, 1,000 hours
 
  1. Please consult with us about special requirements you may have for fine-pattern traces, highly accurate resistance values, and low TCR boards.
  2. Please consult with us about assembled products, such as electronic component assembly and lead pin attachment, etc.
 

PAGETOP

Privacy Policy This website uses cookies to deliver better service to customers.
(Please read our Privacy Policy) for information on using our cookies, including how to disable them.