Noritake

Noritake

MENU

PRODUCTS

Non-Woven Fabric

The product is performed with three dimentional open structure such as grain, nylon filament formed to be web and synthetic resin.
Abrasive grains primarily are used aluminium oxide, silicon carbide and white aluminium oxide. This product is suitable for surface-conditioning operation owing to the elasticity, and the self-sharpening feature.

Materials

Base: Non-Woven Fabric
Grain: Aluminium Oxide --- A
White Aluminium Oxide --- WA
Silicon Carbide  --- C
Resin: Synthetic phenolic or Urethan resin

Features

  1. Safety and Easy Operation
    Noiseless, small vibration which brings safety operation.
  2. Prevent Loading problem
    Open construction prevents from loading problem, and it results in longer life.
  3. Consistency of polishing operation
    Its thickness and flexibility prevents from deep scratching, and the grain bonded inside of the base material brings consistent polishing operation.
  4. Flexibility and Comfortable Operation
    The construction (High flexibility) makes good response to intricated surface, and provides consistent finish.
  5. Available Automated Process
    Long life provides the production line to be automated.
  6. Waterproof and Oil proof
    Its original construction prevents from alternation defected by water or oil.
    Can be used in Wet and Dry operation.

Application

Non-Woven Fabric products are mainly used for the surface-finishing, cleaning and hairline-finishing operation which had been worked by coated abrasive or grinding wheel beforehand.

 

Application Example Recommended Form
Cleaning Removing stain or rust from the sink, sanitary and dishes. Sheet
Conditioning Roughness Finishing operation for alumium, copper or brass material. Sheet, Wheel or Belt
Hairline Finishing Hairline finishing for metal surface. Sheet, Wheel or Belt
Weld Removal Remove weld from cutted surface. Wheel
Grinding/Sanding Painted surface, Bare surface Wheel, Belt

 

 

Recommended Form

Sheet
Disc
Disc
Belt
Flap
Ramix
Spylux