Noritake

MENU

PRODUCTS

A-O Filter

Engineering

A-O Filter

The coolant filtration system is a precision filtration apparatus for oil-soluble coolants that uses a high-density cubic element made from glass fiber.
Due to a fine pressure difference used for filtering, clogging can be avoided, and it can filter continuously for extended periods of time.

Features

The dirty liquid is filtered through the multiple cubic filter surfaces installed in the A-O tank, and clean liquid flows through the collection pipe inside the cubic filter element when returned to the processing machine.
Fine pressure difference requires only a small lifting height for the dirty and clean liquid pumps, and therefore saves energy. In addition, filter regeneration uses the air backwash method and can be completed in a short amount of time.
Sludge produced during backwashing is automatically discharged from the machine by a discharge screw.

Bearing superfinishing

Specifications

Model Processing rate (oil-soluble ) Approximate unit dimensions Weight Stored oil volume
MG-10 10 L/min 800×650×2000mm 420kg 590L
MG-20 20 L/min 1100×650×2000mm 580kg 800L
MG-30 30 L/min 1000×950×2400mm 950kg 1200L
MG-40 40 L/min 1100×1100×2400mm 1040kg 1890L
MG-50 50 L/min 1400×950×2300mm 1140kg 1850L

 

Model Backwash Sludge
Manual
operation
Push-button
operation
Automatic
operation
Manual
operation
Push-button
operation
Automatic
operation
HS        
PM        
AM        
AP        
AA