PRODUCTS

SME-V Series

Engineering

Technical Support

Basic Functions

SME-V Series

The steam mixer heats liquid by directly injecting steam into it. It is made up of a steam injection nozzle and a spiral element for diffusion and condensation. Because it uses a spiral element to directly diffuse and condense the steam into the liquid, it uses all of the heat capacity of the steam and as a result, guarantees a stable liquid temperature. Also, there is little vibration or noise that usually occurs during steam condensation with a tank heating system.
It is mainly used to produce hot water as a thermal catalyst for reactor and thermal exchanger jackets and for cleaning.
Steam can be used within a range of 0~ Max.kg/h.

Standard Specifi cations

Diameter 1"-12"
Material 304S.S
Number of Elements 2 (equivalent)
Element Fixing Welded on both ends
Fixing Flange
(JIS10K-FF, Steam side JIS10K-RF)

Model Code Chart

Model Code Chart

Dimensions

Dimensions
Model Nominal
Diameter (ND)
Outside
Diameter
(OD)
ODmm
Inner
Diameter
(ID)
IDmm
Thickness
Tmm
Length
Lmm
A
mm
B
mm
Steam
kg/h
Hot
water
m3/h
Mass
kg
(1) (2) (3)
SME-V 25-3 1" 1" 3/4" 27.2 22.2 2.5 254 80 105 0-250 0.84-4.18 6
SME-V 40-3 1 1/2" 1 1/2" 1 1/4" 42.7 36.7 3.0 379 110 133 0-570 2.28-11.4 9
SME-V 50-3 2" 2" 1 1/2" 48.6 42.6 3.0 439 120 147 0-930 3.08-15.4 12
SME-V 65-3 2 1/2" 2 1/2" 2" 60.5 53.5 3.5 529 120 171 0-1,500 4.85-24.3 17
SME-V 80-3 3" 3" 2 1/2" 76.3 69.3 3.5 632 140 194 0-2,000 8.14-40.7 20
SME-V 100-3 4" 4" 3 1/2" 101.6 93.6 4.0 804 160 233 0-3,500 14.9-74.3 33
SME-V 125-3 5" * 4" 114.3 106.3 4.0 939 180 277 * 19.2-95.8 45
SME-V 150-3 6" * 5" 139.8 129.8 5.0 1104 220 314 * 28.6-143 71
SME-V 200-3 8" * 6" 165.2 155.2 5.0 * * * * 40.8-204 *
SME-V 250-3 10" * 8" 216.3 203.3 6.5 * * * * 70.1-350 *
SME-V 300-3 12" * 10" 267.4 254.4 6.5 * * * * 110-549 *

 

We can modify designs of Models V125 and above, to suit conditions of your use. (*)Steam Pressure: 0.5MPaG
We can also modify and design large diameter models larger than V300.

Related Products

Use Examples Recommended
items
Direct heating
Inject steam directly into liquid to condense it
●Warm water production
●Heating of chemicals
SME-V series
(Steam mixer)
●Heating of slurry
●Heating /sterilization of the highly viscous liquid
NST series
(Noritake cooker)
Direct cooling
Inject cold water directly in steam and vaporize
●Temperature decrease and low pressure steam production DSM seriesSM De-superheater

PAGETOP

Privacy Policy This website uses cookies to deliver better service to customers.
(Please read our Privacy Policy) for information on using our cookies, including how to disable them.